Edelbrock 77389

Edelbrock 77389 Reviews

Other Picture

Get dyno-proven performance that's easy on the wallet.

Ideal for those who desire affordable heads that make maximum power, these Victor Jr. heads from Edelbrock are just what the doctor ordered. Specifically designed for the needs of competition and ultra-high performance street engines, they offer increased horsepower and rpm potential in an out-of-the-box, cost-effective, race-winning setup. Features include hardened ductile iron valve seats and phosphor-bronze guides. They accept standard hardware and most are available in bare and assembled versions.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 30, 2011 03:54:04

Edelbrock 77599 Victor Junior Cylinder Head

Edelbrock 77599 Victor Junior Cylinder Head Reviews

Other Picture

Edelbrock 77599 Victor Junior Cylinder Head Feature

• Rocker arm nut thread size is 7/16-20
• Made of aluminum with a natural finish
• Includes intake valves, exhaust valve, valve springs, retainers, locks, guide plate and valve stem seals
• Does not include damper spring, rocker arms, nuts and drilled steam holes
• Guide plate pushrod size is 5/16

The Edelbrock Victor Junior Cylinder Head is designed specifically for maximum horsepower and ideal for many types of competition and ultra-high performance street machines. This head features reinforced rocker stud bosses, high-flow intake/exhaust ports and specially contoured combustion chambers. Extra thick deck surfaces provide maximum head gasket retention with high-compression ratios. It is ideal for those who desire affordable heads that make maximum power. This cylinder head features CNC gasket-matched port entries/exits with blended valve bowls. Standard hardware is accepted and most are available in bare and assembled versions. The diameter of the intake valve is 2.05 and the diameter of the exhaust valve is 1.6. The intake runner volume is 210cc; the exhaust runner volume is 75cc and the combustion chamber volume is 60cc.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 28, 2011 20:34:05

Edelbrock 60259 Performer RPM Cylinder Head

Edelbrock 60259 Performer RPM Cylinder Head Reviews

Other Picture

Edelbrock 60259 Performer RPM Cylinder Head Feature

• Maximum performance in the 1,500-6,500 RPM range for high performance street
• High-flow 2.02" intake valves are for use with pistons notched for valve clearance
• Exhaust valve is 1.60
• 60cc combustion with 170cc intake port
• Will not accept rail rockers

The Edelbrock Performer RPM Aluminum Cylinder Heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. These cylinder heads offer dyno-proven increases in horsepower, throttle response, and torque throughout the RPM range. These direct bolt-on heads deliver maximum performance in the 1,500-6,500 RPM range for high performance. They offer improved power throughout the RPM range for greater throttle response and top-end horsepower. They have high flow 2.02 intake valves for use with pistons notched for valve clearance and 0.60 exhaust valve. They have the top quality features like threaded inserts for rocker studs and exhaust manifold bolt holes for durability and superior strength, and manganese-bronze valve guides.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 27, 2011 23:06:08

Edelbrock 60089 RPM Big Block Cylinder Head

Edelbrock 60089 RPM Big Block Cylinder Head Reviews

Other Picture

Edelbrock 60089 RPM Big Block Cylinder Head Feature

• Performer RPM
• Cylinder Head
• Chamber Size 76cc
• Bare

Create incredible top-end horsepower for your street/strip machine!

These Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also feature hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 25, 2011 03:22:03

Beck Arnley 032-2935 Cylinder Head Set

Beck Arnley 032-2935 Cylinder Head Set Reviews

Other Picture

Beck Arnley 032-2935 Cylinder Head Set Feature

• Quality construction
• Excellent material
• State of the art manufacturing

Cylinder Head Set. BeckArnley is an original equipment brand that partners with other manufacturers to supply the parts that cars were originally built with. This product is in a BeckArnley package, note that the part may have been manufactured by an independent BeckArnley supplier and the number on the part may differ from the number on the package.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 24, 2011 01:24:05

ARP 2024206 Pro 12-Point Cylinder Head Stud Kit

ARP 2024206 Pro 12-Point Cylinder Head Stud Kit Reviews

Other Picture

ARP 2024206 Pro 12-Point Cylinder Head Stud Kit Feature

• Assures easy assembling of the engine
• Ensures proper alignment of the gasket
• Constructed from premium grade 8740 alloy
• Heat-treated to 200,000 psi
• Facilitates easy installation

ARP Pro 12-Point Cylinder Head Stud Kit includes washers and assures easy assembling of the engine as well as proper alignment of the gasket. It is constructed from premium grade 8740 alloy and is heat-treated to 200,000 psi. This head stud is thread rolled which gives about 1000% better fatigue strength and facilitates easy installation.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 22, 2011 18:06:17

Edelbrock 60859 Performer Cylinder Head

Edelbrock 60859 Performer Cylinder Head Reviews

Other Picture

Edelbrock 60859 Performer Cylinder Head Feature

• High-velocity intake runner works with either T.B.I. or Tuned Port Injection systems
• Maintains stock compression ratio when used with the recommended head gasket
• Accepts stock centerbolt or Edelbrock aluminum valve covers #4246 and #4247
• Rocker stud and exhaust bolt holes are Heli-Coiled for strength
• Sold as one complete head

The Edelbrock Centerbolt Performer 50-State Street Legal Aluminum Cylinder Head was originally equipped with centerbolt valve covers and the 1987 and later intake manifold bolt pattern. The high-velocity intake runner of this head is designed to work with either T.B.I. or Tuned Port Injection systems. It uses the 1987-1995 intake manifold bolt pattern and maintains stock compression ratio when used with the recommended head gasket. It accepts stock or aftermarket valve covers. The 60cc combustion chambers maintain the stock compression ratio when used with the recommended head gasket. They come with 2.02" intake valves and 1.60" exhaust valves with intake port which measures 165cc. The ports feature stock location for compatibility with stock intake manifolds and standard headers and the CNC port matched intake and exhaust ports are for optimum flow and maximum power. It accepts stock centerbolt valve covers and comes with a straight plug configuration.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 20, 2011 05:53:06

Edelbrock 60929 Performer Cylinder Head

Edelbrock 60929 Performer Cylinder Head Reviews

Other Picture

Edelbrock 60929 Performer Cylinder Head Feature

• Standard intake and exhaust port location
• Does not include damper spring and rocker arms
• Features 170cc intake ports and 60cc exhaust ports
• Numerous machined surfaces to provide a precision fit to mating parts
• Includes intake valves, exhaust valves, valve springs, retainers, locks, valve stem seals, rocker arm studs and guide plates

The Edelbrock Cylinder Head offers improved performance throughout the RPM range for great throttle response and dyno-proven increases in horsepower. Top quality features include threaded inserts in rocker studs and exhaust bolt holes for superior strength and durability and manganese-bronze valve guides. This cylinder head retains an exhaust crossover passage and is a street legal replacement part. It features intake and exhaust port openings that are CNC machined and designed for maximum flow velocity. This head is available with stainless steel intake and exhaust valves with undercut stems, 2-ring positive oil control seals, rocker studs, hardened steel guideplates, valve springs, retainers and keepers.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 17, 2011 21:07:08

1999 Kawasaki VN 800 A Vulcan Custom Right Or Front Cylinder Head

1999 Kawasaki VN 800 A Vulcan Custom Right Or Front Cylinder Head Reviews

Other Picture

1999 Kawasaki VN 800 A Vulcan Custom Right Or Front Cylinder Head Feature

• The Cylinder Head controls the flow of intake and exhaust gases into and out of the Cylinders through the opening and closing of Intake and Exhaust Valves. On bikes with multiple Cylinder Heads, this is the Right or Front Head (as you are sitting on the bike).
• A used Cylinder Head will be undamaged and in good working order. All mount points will be intact. Valves will open and close properly and will not leak. A used Cylinder Head includes all valves, keepers, and cam caps. Buckets and shims (if applicable) will be included if in servicable condition. The Cam(s) and Valve Cover are not included.
• Sample Picture of Right Or Front Cylinder Head Shown, not necessarily the Right Or Front Cylinder Head for your bike. You will be shipped the correct part for a 1999 Kawasaki VN 800 A Vulcan Custom
• Click here to see other parts for your motorcycle
• Kawasaki Model Identification Note: On all Kawasaki models produced after 1980, the 7th digit of your motorcycle's VIN (it is a letter) is critical in identifying the model of motorcycle you own. For example, if you own a 2000 ZX6, and the 7th digit of the VIN is an E, then you own a 2000 ZX6 E; If you own a 2001 Vulcan 1500, and the 7th digit of the VIN is a G, then you own a 2001 Vulcan 1500 G. Please confirm the 7th digit of your VIN number before placing your order.

1999 Kawasaki VN 800 A Vulcan Custom Right Or Front Cylinder Head

The Cylinder Head controls the flow of intake and exhaust gases into and out of the Cylinders through the opening and closing of Intake and Exhaust Valves. On bikes with multiple Cylinder Heads, this is the Right or Front Head (as you are sitting on the bike). The Condition of this part is Used.

A used Cylinder Head will be undamaged and in good working order. All mount points will be intact. Valves will open and close properly and will not leak. A used Cylinder Head includes all valves, keepers, and cam caps. Buckets and shims (if applicable) will be included if in servicable condition. The Cam(s) and Valve Cover are not included.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Jun 16, 2011 22:11:08

K-D Tools KDS2833 Engine Cylinder Hone

K-D Tools KDS2833 Engine Cylinder Hone Reviews

Other Picture

K-D Tools KDS2833 Engine Cylinder Hone Feature

• Package Quantity: (1) 2 Piece Unit
• Type: Engine Cylinder Hone

• Hone and removes glaze form engine cylinders from 2" to 7" in diameter
• Hone includes medium grit stones
• Has a spread limiter and a adjustable spring for the tension

Hone and remove glaze from engine cylinders from 2" to 7" (51 to 178mm) in diameter. Adjust spring tension for positive cutting action and set diameter with spread limiter. Hone includes medium 240 grit stones.

 

Visit Store Now !!

Detail Products

• Lisle 33500 Piston Ring Installer
• Lisle 19500 Ring Compressor
• Lisle 36500 Ridge Reamer
• K-D Tools 2834 Coarse Grit Rplc Stones
• Lisle 24000 Ring Groove Cleaner

Detail Reviews

Jun 15, 2011 00:25:04

1999 Suzuki GSX 600 F Katana Cylinder Head

1999 Suzuki GSX 600 F Katana Cylinder Head Reviews

Other Picture

1999 Suzuki GSX 600 F Katana Cylinder Head Feature

• The Cylinder Head controls the flow of intake and exhaust gases into and out of the Cylinders through the opening and closing of Intake and Exhaust Valves.
• A used Cylinder Head will be undamaged and in good working order. All mount points will be intact. Valves will open and close properly and will not leak. A used Cylinder Head includes all valves, keepers, and cam caps. Buckets and shims (if applicable) will be included if in servicable condition. The Cam(s) and Valve Cover are not included.
• Sample Picture of Cylinder Head Shown, not necessarily the Cylinder Head for your bike. You will be shipped the correct part for a 1999 Suzuki GSX 600 F Katana
• Click here to see other parts for your motorcycle

1999 Suzuki GSX 600 F Katana Cylinder Head

The Cylinder Head controls the flow of intake and exhaust gases into and out of the Cylinders through the opening and closing of Intake and Exhaust Valves. The Condition of this part is Used.

A used Cylinder Head will be undamaged and in good working order. All mount points will be intact. Valves will open and close properly and will not leak. A used Cylinder Head includes all valves, keepers, and cam caps. Buckets and shims (if applicable) will be included if in servicable condition. The Cam(s) and Valve Cover are not included.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Jun 14, 2011 02:18:05

2001 Honda VT 1100 C Shadow Spirit Left Or Rear Cylinder Head

2001 Honda VT 1100 C Shadow Spirit Left Or Rear Cylinder Head Reviews

Other Picture

2001 Honda VT 1100 C Shadow Spirit Left Or Rear Cylinder Head Feature

• The Cylinder Head controls the flow of intake and exhaust gases into and out of the Cylinders through the opening and closing of Intake and Exhaust Valves. On bikes with multiple Cylinder Heads, this is the Left or Rear Head (as you are sitting on the bike).
• A used Cylinder Head will be undamaged and in good working order. All mount points will be intact. Valves will open and close properly and will not leak. A used Cylinder Head includes all valves, keepers, and cam caps. Buckets and shims (if applicable) will be included if in servicable condition. The Cam(s) and Valve Cover are not included.
• Sample Picture of Left Or Rear Cylinder Head Shown, not necessarily the Left Or Rear Cylinder Head for your bike. You will be shipped the correct part for a 2001 Honda VT 1100 C Shadow Spirit
• Click here to see other parts for your motorcycle

2001 Honda VT 1100 C Shadow Spirit Left Or Rear Cylinder Head

The Cylinder Head controls the flow of intake and exhaust gases into and out of the Cylinders through the opening and closing of Intake and Exhaust Valves. On bikes with multiple Cylinder Heads, this is the Left or Rear Head (as you are sitting on the bike). The Condition of this part is Used.

A used Cylinder Head will be undamaged and in good working order. All mount points will be intact. Valves will open and close properly and will not leak. A used Cylinder Head includes all valves, keepers, and cam caps. Buckets and shims (if applicable) will be included if in servicable condition. The Cam(s) and Valve Cover are not included.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Jun 13, 2011 00:49:06

1994 Kawasaki EX 250 F Ninja Cylinder Head

1994 Kawasaki EX 250 F Ninja Cylinder Head Reviews

Other Picture

1994 Kawasaki EX 250 F Ninja Cylinder Head Feature

• The Cylinder Head controls the flow of intake and exhaust gases into and out of the Cylinders through the opening and closing of Intake and Exhaust Valves.
• A used Cylinder Head will be undamaged and in good working order. All mount points will be intact. Valves will open and close properly and will not leak. A used Cylinder Head includes all valves, keepers, and cam caps. Buckets and shims (if applicable) will be included if in servicable condition. The Cam(s) and Valve Cover are not included.
• Sample Picture of Cylinder Head Shown, not necessarily the Cylinder Head for your bike. You will be shipped the correct part for a 1994 Kawasaki EX 250 F Ninja
• Click here to see other parts for your motorcycle
• Kawasaki Model Identification Note: On all Kawasaki models produced after 1980, the 7th digit of your motorcycle's VIN (it is a letter) is critical in identifying the model of motorcycle you own. For example, if you own a 2000 ZX6, and the 7th digit of the VIN is an E, then you own a 2000 ZX6 E; If you own a 2001 Vulcan 1500, and the 7th digit of the VIN is a G, then you own a 2001 Vulcan 1500 G. Please confirm the 7th digit of your VIN number before placing your order.

1994 Kawasaki EX 250 F Ninja Cylinder Head

The Cylinder Head controls the flow of intake and exhaust gases into and out of the Cylinders through the opening and closing of Intake and Exhaust Valves. The Condition of this part is Used.

A used Cylinder Head will be undamaged and in good working order. All mount points will be intact. Valves will open and close properly and will not leak. A used Cylinder Head includes all valves, keepers, and cam caps. Buckets and shims (if applicable) will be included if in servicable condition. The Cam(s) and Valve Cover are not included.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Jun 12, 2011 05:08:03